澳大利亚越野车改装件品牌TJM
澳大利亚TJM公司成立于1973年，主要产品为越野车改装件，用来提高越野车的越野能力和防护性。如前杠、后杠、侧杠、顶架和悬挂等。针对目前国际上的主流越野车型都有相应的改装件。在澳大利亚，TJM有超过50个授权经销商。在全球40多个国家有授权代理机构。
以前在国内很难见到TJM的改装产品，虽然有过小批量的进口，但一直没有形成一定的规模。2008年TJM在中国区寻找总代理，标志着TJM越野车改装产品正式进入中国。
TJM改装件的到来，与同是来自澳大利亚的ARB改装件形成了非常好的互补关系，让越野爱好者在解决方案上有了更多的选择。
比如ARB公司为切诺基提供的是The Long Ranger公司的51升副油箱，而TJM公司则为大家带来的是Long Range Automotive提供的120升替换式大油箱。这两种解决方案各有优缺点，越野爱好者可以根据自己不同的侧重点来选择不同的解决方案。
对于在越野界中口碑非常好的SUZUKI Jimny，ARB公司为其提供了可安装绞盘的替换式整体前杠、加长的螺旋簧和减震器等，但没有Jimny能使用的Safari涉水器。TJM公司为 Jimny提供了不能安装绞盘的轻便的附加式前杠、加长的螺旋簧和减震器等，同时还为Jimny提供Airtec涉水器。
对于越野车的前杠，TJM提供两种方案：一种材质是钢，另外一种是铝合金的。钢制的前杠强度高，可直接安装高磅数的绞盘，防护性强，但重量大。铝合金前杠吸能性优于钢制前杠，重量轻，但强度不高，如需在铝合金的替换式前杠上安装9000磅以上拉力的绞盘时，需单独安装连接大梁的绞盘支架。
安装Airtec涉水器的优势是显而易见的，使用涉水器，发动机所需的空气来自车顶的高度，进入发动机的空气温度更低、更清洁。由于提高了进气位置，空气中的灰尘小于原车进气口的，这有助于延长空滤的使用寿命，并减少发动机的磨损。安装涉水器后，在正常的涉水时进气口的位置高于水面，无需担心河水进入发动机而导致车辆熄火。
Airtec涉水器有以下几个特点：精确的设计为发动机提供正确的进气量。进气口有防雨设计，当空气中的雨水进入进气口后会从进气口的后部流出，进入涉水器管路到达发动机的只有清洁的空气。涉水器的内壁很平滑，使得气流不间断的进入发动机，提高发动机性能。涉水器由防紫外线的聚乙烯制成，有着很高的强度和刚性。适用于大部分流行的越野车型。易于安装，同时尽量减少对原车部件的改动。
TJM Seriously 4WD
TJM Products Pty Ltd began operation in QLD in 1973. The three founders; Lloyd Taylor, Cliff Jones and Steve Mollenhauer came together and pooled their ideas and passion to form a manufacturing business with one goal in mind; to build quality engineered 4WD Equipment.
Today, TJM continues to engineer and manufacture 4WD products with the same philosophy as our founders. TJM Products are one of the world's leading design, manufacturing and distribution companies for Seriously 4WD, Seriously SUV, and Seriously Trade equipment.
TJM manufactures an extensive range of vehicle frontal protection systems (bull bars), side and rear protection bars, sports bars, roof racks, side steps, tyre carriers, and canopies. Our accessory range includes recovery equipment, winches, suspension, wheel arch flares, snorkels, air operated differential locks and other lines built to TJM design specifications. TJM Canopies, TJM XGS Suspension, TJM Pro Locker, TJM OX Recovery Equipment and TJM Airtec Snorkels are among our range of branded products.
TJM 4WD accessory range is distributed and serviced throughout an Australia Wide Network of over 50 outlets, offering after sales back-up and service that is second to none. Internationally, we supply to over 40 countries, spanning every continent. Our broad range of appeal has seen us as successful in supplying to the Original Equipment Market both here and overseas, including Nissan, Mazda, Mitsubishi, GMH and Ford, as well as State/Local Governments and commercial fleet operations.
In 1999, CMI Limited, a proud Australian company with its head office located in Brisbane, acquired TJM Products. CMI is a diverse public company listed on the Australian Stock Exchange, and has a vast developmental and manufacturing network in Australia and around the world. For more information on CMI, please visit www.cmilimited.com.au
Striving to maintain a quality assured product, we are certified to QS9000 and the International Standard ISO9001 and Environmental Standards. TJM is renowned for consistent innovation in design of practical and visually appealing equipment. The stylish look, quality, value and legendary fit of our products have made TJM the 4WD accessory of choice. TJM have been relentless in our pursuit of excellence in product innovation and leading edge technology in design, testing and manufacturing to ensure TJM continues to be at the forefront of the market.
This pursuit is continually driven by consumer demand and feedback. TJM vehicle frontal protection system range is constantly expanding as new 4WD vehicles enter the market.
By choosing to purchase your 4WD accessories from TJM, you have invested in over 30 years of experience, dedication and reliability. Your choice will give you peace of mind to take on the world's vast landscapes. TJM are proud that you have chosen to review our products in the hope they will accompany you on your 4WD experience.
